User`s manual

AEQ BC-2500
Radio Broadcast Mixing Desk
49
7.7. BC-2533 programming bridges.
Send to AUX 1 POSTFADER:............................ P.D.P. 1 On & P.D.P. 2 Off
Send to AUX 1 PREFADER:.............................. P.D.P. 2 On & P.D.P. 1 Off
Send to AUX 2 POSTFADER:...................…...... P.D.P. 3 On & P.D.P. 4 Off
Send to AUX 2 PREFADER:.............................. P.D.P. 4 On & P.D.P. 3 Off
The send is activated when the switch
CHANNEL ON and FADER are activated .:... P.D.P. 5-6 On in position 1C
The send is only activated when the
CHANNEL ON is activated .:.......................... P.D.P. 5-6 On in position 2C
The send is always activated
independent of the
CHANNEL ON switch and the FADER.:...... P.D.P. 5-6 On in position 3C
Programmed module to remote control an
AEQ TH-12 hybrid AIR1 ................................... P.D.P. 7 Off, P.D.P. 9 On & P.D.P8 Off
Programmed module to remote control an
AEQ TH-12 hybrid AIR2 ................................... P.D.P. 10 Off, P.D.P.12 On&PDP11 Off
Activation of pin 5 of the module
sub-d remote control connector as
contact closer for AIR 1 function
when an AEQ TH-02 hybrid is connected.:...... P.D.P. 9 On, P.D.P. 7 Off & PDP8 Off
Activation of pin 3 of the module
sub-d remote control connector as
contact closer for AIR 2 function
when an AEQ TH-02 hybrid is connected.:...... P.D.P.12 On,P.D.P.10 Off&P.D.P11 Off
Module programmed as PHONE 1................ P.D.P. 13 On & P.D.P. 14 Off
Module programmed as PHONE 2................ P.D.P. 14 On & P.D.P. 13 Off
Activation of the MULTIPLEX function with
a second module programmed as PHONE 2
in a module programmed as PHONE 1:..... P.D.P. 16 On & P.D.P. 15 Off
Activation of the MULTIPLEX function with
a second module programmed as PHONE 1
in a module programmed as PHONE 2:..... P.D.P. 15 On & P.D.P. 16 Off
FUNCTION P.D.P. position for
function activation
On Bridge installed
Off Bridge not installed
0 0
0 0