User`s manual

AEQ FORUM
Digital audio mixer for broadcast applications
27
By changing some jumpers on the FR02 module you can work with digital signals in SPDIF
format. In the module you can see, for each one of the 4 inputs and 4 outputs, the jumpers
position in order to configure them as AES3 or SPDIF:
Jumpers Jumpers
Digital input 1 J1, J2, J3, J5 and J7 Digital output 1 J4, J6, J8 and J9
Digital input 2 J10, J11, J12, J14 and J16 Digital output 2 J13, J15, J17 and J18
Digital input 3 J20, J21, J22, J26 and J28 Digital output 3 J25, J27, J29 and J30
Digital input 4 J31, J32, J34, J36 and J38 Digital output 4 J35, J37, J39 and J42
Position 1-2: AES3
Position 2-3: SPDIF
2.2.3.2. FR03 Mic/Line inputs module.
The AEQ FORUM FR03 module includes 2 switchable monophonic microphone/line level on
two female XLR connectors.
Each of the two Mic/Line inputs available on the FR03 module includes separate controls on
dedicated hardware button to select your operation as microphone or line input, as well as the
activation or deactivation of the +48V Phantom power available. The modification or activation
of any of these options can be monitored from the internal menu available in the main screen of
the Control and Monitoring section and monitors in the control surface FORUM AEQ. For more
information see section “3.4.3.1.3. Expanded information menu“ in this manual.
XLR - Female 3p. Balanced connection.
Pin 1 Æ GND
Pin 2 Æ Input +
Pin 3 Æ Input -
NOTE 1: the physical location of the FR03 modules present in a normal configuration of AEQ
FORUM is limited to the first 4 of the 14 available slots on the rear panel of console. Therefore,
the maximum number of microphones present in any AEQ FORUM console is 9, 8 through the
FR03 modules connected and one more microphone connected to “T´BACK MIC” input.