User`s manual

AEQ FORUM
Digital audio mixer for broadcast applications
40
3.4.3. “SELECT “ menu.
This menu enables you to perform advanced configuration operations on audio inputs/outputs,
processes and internal routing of all of the signals present in the console.
The options available through the contextual keys below the screen, from left to right, are:
• “BACK”: pressing this key allows you to return to the previous menu screen.
• “INPUT”: configuration of input audio signals, as well as processes and routing
associated with those signals.
• “OUTPUT”: configuration of output audio signals, as well as associated routing and
tones activation.
3.4.3.1. “INPUT“ menu.
This menu shows a list of all the audio input logical signals defined in the system from the
configuration software. For more information, see section “4. CONFIGURATION SOFTWARE”
in this manual.
You can access a more complete description of each one of the input audio channels by turning
any of the 3 associated encoders and pressing then the “OK” contextual key or any of these
encoders. The information showed on this screen, from top to bottom and left to right, is:
LAN ETHERNET