User`s manual

AEQ FORUM

Digital audio mixer for broadcast applications

4.1.3. “About Forum Setup “ submenu.

“About Forum Setup” submenu is accessed, from the drop-down menu “Administration”, by

licking on the icon:

“About Forum Setup” submenu simply shows information regarding the software version and

the current user logged into the application.

4.2. “Hardware Configuration“ menu.

This menu allows you to configure the system inputs and outputs modules as well as the logical

audio channels created from the physical inputs and outputs. Clicking on the “Hardware

Configuration” section on the left side of the screen displays the full list of submenus, which

includes:

• “Board Configuration”: allows you to define the settings of faders, audio inputs/outputs

modules and GPIOs of the Mixing Console.

• “Mixer Bus Configuration”: allows you to define the configuration of the internal

summing buses of the mixing console.

• “I/O Configuration”: enables the configuration of logical audio channels based on the

physical audio inputs and outputs as defined in the “Board Configuration” submenu.

• “Monitoring Configuration”: allows you to define the operation of the Control and

Monitoring sections that are associated to the control and studio rooms.

• “NTP Client”: allows you to configurate and activate time and date synchronization with

a remote NTP server. Once configured this server will work as the master clock for the

local time of the AEQ FORUM.