User`s manual

AEQ FORUM
Digital audio mixer for broadcast applications
59
IMPORTANTE NOTE: In order to access to any of these submenus, it’s neccesary to have a
configuration loaded in the application (in case there’s no configuration, the message “Empty
configuration. Please read configuration before use” is displayed). Therefore, you have to
either connect to AEQ FORUM console and read its configuration or load a configuration by
means of “Import” option (see section 4.1.1 of this manual; you can find the
“DemoConfiguration.FSC” file in C:\Program files \ForumSetup\Demos).
4.2.1. “Board Configuration” submenu.
“Board Configuration” submenu is accessed, from the drop-down menu “Hardware
Configuration”, by clicking on the icon:
“Board Configuration” submenu enables the definition of fader settings, audio inputs/outputs
modules and GPIOs of the mixing console.
From left to right and from top to bottom the available options are:
• “Console Configuration”: here you can set the number of 4 faders modules (FRCH)
that are installed in the FR01 chassis of AEQ FORUM / GRAND FORUM:
o 1 FRCH module corresponds to 4 faders in the control surface. The remaining
space should be filled with 2 FR20 blank modules.
o 2 FRCH modules correspond to 8 faders. The remaining space should be
filled with a FR20 blank module.
o 3 FRCH modules correspond to 12 faders.
o 4 FRCH modules correspond to 16 faders. The remaining space should be
filled with a FR20 blank module. This configuration is available only for GRAND
FORUM.
o 5 FRCH modules correspond to 20 faders. This configuration is available only
for GRAND FORUM.