User`s manual

AEQ FORUM
Digital audio mixer for broadcast applications
62
• AOIP: FR14 AoIP modules are installed as any other input/output module on
the rear panel of the console and give you up to 32 input audio channels and up
to 32 output audio channels per module. The maximum number of FR14
modules present in any AEQ FORUM console is 2. The configuration options
are:
o “Disabled/32 Channels/64 Channels”: allows you to deactivate
this option or select between 32 o 64 channels (depending on how
many FR14 modules will be installed: one or two).
o “Sync”: allows you to configure whether the console will use the
synchronism extracted from AoIP link (“Slave”; when there are 2
FR14 modules, the one placed in slot 14 prevails over the one in
slot 13) or not (“Master”).
o “Used”: allows you to configure how many of the 32 or 64 mono
channels available are actually in use.
2. GPI: General Purpose Inputs. AEQ FORUM incorporates 8 opto-coupled GPI’s on
open-collector transistors.
The advanced configuration menu of GPIs is accessed by clicking “Click to [CONFIG]”
and then clicking again on the “CONFIG” button that will appear. The configuration
options are: