User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS

DB9 female connector

GPI inputs (2 x SUB-D female 9 pin).

1 GPIN1 1 GPIN5

6 GND_GPIN1 6 GND_GPIN5

2 GPIN2 2 GPIN6

7 GND_GPIN2 7 GND_GPIN6

3 GPIN3 3 GPIN7

8 GND_GPIN3 8 GND_GPIN7

4 GPIN4 4 GPIN8

9 GND_GPIN4 9 GND_GPIN8

5 Not connected 5 Not connected

On request, this wiring kit can be supplied with connectors explicitly specified by the customer.

For more information please refer to AEQ sales department or authorised distributors.

2.2.2.1.2. Opto-coupled GPO

The AEQ FORUM includes 8 electronic interfaces GPO of opto-coupled type through the two

male DB9 connectors in the “GP OUTPUTS” section. The connectors are numbered from 1 to 4

and 5 to 8.

Specifications:

• Opto-coupler protected outputs (TLP127).

• Maximum current: 80mA.

• Recommended Maximum voltage: 200V.

• Maximum power: 100mW at 40 ° C.

• Requires external power.

Electronic output associated with general-purpose opto-coupler GPO

In order to simplify the installation phase, AEQ offers a prefabricated wiring kit specifically for

GPO outputs: CAB FR GPO, female DB9 connector soldered to 4 metres of cable open-end

termination for GPO. More information in section 2.2.4 of this manual.