User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS

RJ45 Pin-out

2.2.2.3. Synch port

AEQ FORUM has an external sync input for AES 11 and TTL formats. The input connector is an

RJ45 on the rear panel of the unit and identified as EXT. SYNC.

EXT.SYNC connector

External sync input (RJ-45).

1 TTL_SYNC_IN

2 TTL_SYNC_IN_GND

3 TTL_SYNC_OUT

4 GND

5 AES_SYNC_OUT+

6 AES_SYNC_OUT-

7 AES_SYNC_IN+

8 AES_SYNC_IN-

CHASSIS EARTH

It is also possible to synchronize the unit using Ethernet port and NTP protocol.

2.2.2.4. Control and Studio Monitors

AEQ FORUM includes monitor outputs for Studio and Control monitors. These outputs are

provided on a male DB9 connector. If more inputs are necessary always is possible to create a

second CRM or SRM output using routing section in the remote Configuration Software.

Control and Studio monitors outputs are +4dB nominal level and max +24dB.