User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS

The initial screen shows the current system date (DD/MM/YY) and time (HH/MM/SS).

Chrono screen

The four options visible on the last line of the display are associated with the four contextual

keys below, from left to right:

• BACK: returns to the previous menu screen. At this point no change you may have

made is saved. (When you exit any of the sub-menus present in this CLOCK menu,

the chronometer and countdown functions stop and are reset to their initial values.)

• SET: enables you to set the DATE through the associated rotary encoders, or the

local system TIME. In each case, a flashing cursor is displayed beneath digit of the

date or time to be changed; you can then select the right figure by turning any of the

three encoders. The new value is confirmed when you press the encoder, and the

system automatically shifts to the next digit until the setting of date and time is

completed.

• CDOWN (COUNTDOWN) lets you configure the AEQ FORUM Countdown option

through the associated rotary encoders: a flashing cursor shows the digit to be

changed: by turning the encoder, and pressing the encoder confirms the change

and shifts the cursor to the next digit in a left-to-right sequence. The on-screen

format is HOURS:MINUTES:SECONDS.

The START contextual key launches the countdown, STOP brings it to a stop, and RESET re-

establishes the initially configured value.

• CHRONO enables you to configure the chronometer option.

Countdown screen

• The contextual START key initiates the chronometer, the STOP key stops it, and

RESET re-establishes the initial zero value. The on-screen format is

HOURS:MINUTES:SECONDS.