User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS

Operation of the three associated encoders:

• Left: turning this encoder allows you to scroll through the various audio outputs on the

list.

• Centre: pressing this encoder enables you to create or delete the cross-point. Its

operation is analogous to the ADD and DEL contextual keys.

• Right: enables you to modify the gain in the cross-point of the highlighted output

between -12dB and +12dB. By default, all of the cross-points will be configured with a

neutral gain: +0dB.

ROUTE menu screen

Operation of the contextual keys, from left to right:

• BACK: pressing this key allows you to return to the previous menu screen.

• ADD: Enables you to create the cross-point toward the output signal that is highlighted

at that moment.

• DEL: Enables you to eliminate the cross-point toward the output signal that is

highlighted at that moment.

• OK saves the routing configured. It must be activated before you press BACK to avoid

losing the changes.

This ROUTE submenu in SELECT option of the fader channel allows to the associated input

signal to whatever output program bus or output physical audio output.

3.4.3.2. OUTPUT Menu

The OUT menu shows a list of all the audio output logic signals defined in the system from the

Configuration Software. For more information, see section 4. CONFIGURATION SOFTWARE in

this manual.

OUTPUT menu

You can access a more complete description of each of the output audio channels by pressing

the OK contextual key. Information shown on this screen – from top to bottom:

• The name of the channel, in alphanumeric format containing up to 6 characters.

• Dedicated hardware for this output audio channel, in HW format: xx.yy, where xx is the

number of the slot where this input / output module is installed, and yy is the audio

channel in this input / output module. In stereo channels, yy represents the audio

channel corresponding to the left channel of the stereo pair. The right channel is the

HW + slot immediately above where this input / output module is installed + audio

channel in this input / output module.