User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS
48
• Graphic representation of an encoder associated with the GAIN field, enabling
modifications ranging from -12dB to +12dB. The equipment is supplied with the default
value of 0dB.
• Identifier of the type of audio signal present in that output: AES/EBU, analogue, etc.
• Indication of MONO or STEREO signals.
OUTPUT configuration screen
The three options visible on the last line of the display are associated with three of the four
contextual keys below, from left to right:
• BACK: pressing this key allows you to return to the previous menu screen. The gain
configuration that you have made in this screen is saved.
• TONE: controls the 1KHz @ 0dBu calibrated tone generator associated with that
physical output. Its activation is identified through the LED of the contextual key. To
modify its level, you need only change the output gain associated with that channel from
the rotary encoder associated with the GAIN control.
More options available in future firmware versions.
• ROUTE is essentially a menu for technical maintenance since it allows you to access
the list of input channels currently connected to this output; in this list you can in a
limited way eliminate and create cross-points using the DEL and ADD contextual keys.
ROUTE screen