User`s manual
AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS
53
• ACCESS LEVEL, user level associated with the user (name) and password previously
configured. FORUM AEQ allows up to 4 different levels of users:
• LEVEL 0: user does not have an associated password. The operations that are
allowed are limited to opening and closing channels of the Mixing consoles,
adjust the gain through the use of the sliding faders. These users are not
allowed to carry out any modifications through the use of the ForumSetup
software application.
• LEVEL 1 (BASIC): These users have a password and the same permits as the
Level 0 users but can also activate equalizers, filters and change channel input
gain and the levels for the Audio output channels.
• Level 2 (ADVANCED): In addition to the permissions granted to users
pertaining to level 1, the Level 2 Users can operate, configure and control the
rest of parameters associated with the dynamics, phase, change internal
routing, etc. .The only restriction of this user is the permission to modify the IP
addresses to the two different network ports present on the back of the AEQ
FORUM Mixing Console. This permission is specifically reserved for level 3.
• Level 3 (Supervisor): This is the highest level within the system, reserved for
system administrators and allows for the full access to all your equipment's
menus and settings. In addition, this is the only user with access to the AEQ
FORUM Configuration Software.
• ID, automatically and sequentially assigned “serial number” of the different users.
USER CONFIGURATION sub-menu
Beneath the USER CONFIGURATION window is located a set of standardized buttons to
manage the list of registered users:
• I ◄, scroll to the top of the list.
• ◄, move to the position immediately above the list
• ►, move to the position immediately below the list
• ► I, scroll to the last position in the list.
• +, insert a new entry in the list.
• -, delete selected entry from the list. Delete confirmation is requested.
• ▲, edit the selected entry.
• √, accept changes to the selected entry.
• X, reject changes to the selected entry.
• refreshes the information provided in the list.