User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS

Hardware Configuration Sub-menu

4.2.1.1. MODULE CONFIGURATION Section

Module Configuration section HARDWARE CONFIGURATION sub-menu lets you manually

configure the audio input and output modules of the 14 different slots available on the rear panel

of AEQ FORUM.

These 14 slots are displayed as 14 consecutive rows of a table beginning at position 1 in the top

of the list and ending with 14 in the bottom. The fields in this table are:

• Slot number: identifies the physical position of this module on the rear panel the AEQ

FORUM.

• I / O Card Model: the type of audio input/output module configured. Each of these 14

positions corresponds to 14 physical slots at the rear panel of the console and can be

configured as follows:

• <NONE> no module inserted.

• FR02 - Digital Audio I / O module.

• FR03 - MIC / LIN Audio module. NOTE: only slots 1, 2, 3 and 4 can be used for this

type of module.

• FR04 - Analogue Audio Input Card.

• FR05 - Analogue Audio Output module.

• FR33 – Digital Telephone Hybrid Audio module. NOTE: AEQ FORUM supports up

to two modules FR33 per chassis FR01