User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS
60
operation, the MPX2 will disappear from the available channels on the configuration screen
since this channel will be added to MPX1. You can create up to 32 mono or 16 stereo mix
buses, including the 7 predefined stereo buses and the 2 MPX mono buses as described
above. The MPX buses can be expanded to up to 8. The remainder of mixing buses can be
defined as internal.
BUS MIXER CONFIGURATION sub-menu
The mixer bus configuration table has the following fields:
• SLOT indicates the internal position of this signal in the digital audio bus of the mixer.
The 32 available slots are numbered between 193 and 224 both inclusive.
• LABEL, name of the bus. Maximum number of characters recommended is 6.
• WORKING MODE is the description provided by the system regarding the functionality
of each bus: Program, Audition, Aux 1, Aux 2, Cue, Studio, Control, MPX 1 to 8 or
Internal
• STEREO / MONO, you can set the bus to operate as a mono or stereo signal.
Beneath the USER CONFIGURATION window is located a set of standardized buttons
to manage the list of registered users:
• I ◄, scroll to the top of the list.
• ◄, move to the position immediately above the list
• ►, move to the position immediately below the list
• ► I, scroll to the last position in the list.
• +, insert a new entry in the list.
• -, delete selected entry from the list. Delete confirmation is requested.
• ▲, edit the selected entry.