User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS
61
• √, accept changes to the selected entry.
• X, reject changes to the selected entry.
• refreshes the information provided in the list.
Clicking the column headers will sort the information by the column header.
4.2.3. I/O CONFIGURATION Sub-menu
To access the I / O CONFIGURATION sub-menu, click on the corresponding icon.
I / O CONFIGURATION sub-menu Icon
This sub-menu allows you to configure the logical audio channels from the physical audio input
and output modules and as previously defined in the BOARD CONFIGURATION sub-menu.
There are two distinct parts in this sub-menu; upper part of the screen is dedicated to the input
channels configuration and the lower part of the screen is for the output channels configuration.
In both the upper and the lower part of the screen the tables have the following fields:
• ID indicates the equipment internal position of the signal.
• LABEL, alphanumeric name of the channel. Maximum number of characters
recommended: 6. This is the name that appears in all displays and menus of the control
surface AEQ FORUM.
• MODEL, the type of the physical input or output module present in the rear panel of the
unit. This field will be populated automatically once the HARDWARE CONFIGURATION
has been accomplished (see section 4.2.1.1. Of this manual).
• CONFIG, access to advanced settings menu for the selected logical channel. To
access, click on the field “CLICK TO CONFIG” and then click on the “new CONFIG”
button that will appear.
Sub-menu I / O CONFIGURATION