User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS

4.2.3.1. Advanced Configuration menu of input channels

Even if all configuration options and possibilities are explained hereunder, it should be taken

into account that the on-screen options may vary depending on the Input/Output module that

the logical audio channel has been configured for;

• Headers

o "FRzz Input configuration" means that we are setting the inputs of a FR"zz" -

type card

o "INPUT HW: xx.0y" means that we are setting the input "y" of the card located

in slot xx

• LABEL, alphanumeric name of the channel. Maximum number of characters

recommended: 6. This is the name that appears on all displays and menus of the

control surface AEQ FORUM.

• FADER START, this is where we select a GPO (from the list defined in chapter

4.2.1.2) to perform the function Fader-start for this channel. NONE indicates no

Fader-start function for that channel.

• REMOTE ON / OFF, this is where we select a GPI (from a drop-down list) associated

with remote start function of this channel (CHANNEL ON / OFF control surface, see

paragraph 2.1.1.8 of this manual) . NONE indicates that no Remote ON/OFF function

for this channel has been configured.

Advanced Configuration menu Examples of input channels

• SOLO, select a GPI input (from a drop-down list) associated with the SOLO function for

this channel (typically microphone channels). NONE indicates no SOLO function has

been configured for that channel. This feature allows you to remotely cut the audio of all

the microphone inputs that have been defined except the one that has been associated