User`s manual
AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS 
72
•  GROUP, indicating the group of keys to assign this programmable key. Assign a key to 
a group  when  you need  to define exclusive  operation  between  various  programmable 
keys. 
•  LATCH  MODE,  you  can  define  the  programmable  keys  as  LATCHING  or  NON 
LATCHING,. 
•  GPI,  lets  you  select  the  physical  GPI  input  in  the  section  for  common  system  I/O's 
associated to the programmable key. 
•  GPO, lets  you select the physical GPO output in the section for common system I/O's 
associated to the programmable key. 
•  KEY SEQUENCE, to select the operating sequence of the programmable key. 
•  OFF-ON-OFF:  idle  is  off,  turned   on  when  the  programmable  key  is  pressed, 
and off when the programmable key is pressed a second time.. From this point 
the cycle is re-initiated. 
•  OFF--ON-BLINKING-OFF indicates initially (idle) turned off, turned on when the 
programmable  is  pressed,  blinking  after  the  programmable  key  has  been 
pressed a second time, and off after a third activation. From this point the cycle 
is re-initiated. 
•  OFF-BLINKING-OFF, idle is OFF , blinking after activation of the programmable 
key, and off after a second activation. From this point the cycle re-initiates. 
•  OFF-BLINKING- ON-OFF, indicates initially off, blinking after a first activation of 
the programmable key, ON after a second activation, and off after a third 
activation. From this point the cycle re-initiates. 
•  EDIT CONFIGURATION allows you to modify the programmable key selected. 
•  OK, accepts the configuration created or modified. 
•  CANCEL, ignores the configuration created or modified. 
 4.3.2.3. Configuring the programmable keys as SALVO 
If we assign the function “SALVO” to a programmable key we can execute a group of actions 
related to the internal routing or cross-points of the mixing console with one single keystroke. : 
Icon assigned to a programmable key with the associated action “SALVO” 
In the area of “Key Configuration” the content of the SALVO is configured. 
SALVO configuration for a programmable key 
There are two tabs: GENERAL and SALVO. 










