User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS

• FR33, optional module digital telephone hybrid of the AEQ FORUM. For more

information see section 2.2.3.5 of this manual.

• TH02, digital telephone hybrid AEQ TH02EX. For more information see

http://www.aeq.es/eng/pr_th02ex.htm

• EAGLE, ISDN audio-codec AEQ EAGLE. For more information see

http://www.aeq.es/eng/pr_eagle.htm

• PHOENIX, IP/ISDN audio-codec AEQ PHOENIX STUDIO. For more information see

http://www.aeq.es/eng/pr_phoenixstudio.htm

CODEC function configuration of programmable key

Depending on the particular equipment selected, the following options may vary.

• RING, to select the GPI where the incoming call signal provided by the “codec” is wired.

• EXTENDED, enables the option of frequency extender for the AEQ telephone hybrids

FR33 and TH02EX. Select the GPO that is used to send the remote control signal

“EXTENDED” to the hybrid.

• SLOT, in the case of internal digital hybrid modules FR33, indicate the position on the

rear panel of the AEQ FORUM where it has been installed (between 1 and 14).

• WAIT GPI, selects and configures the physical GPI input associated to the entry

associated physical GPI WAIT function.

• WAIT GPO, selects and configures the physical GPO output associated to the WAIT

function.

• GPI ONAIR, selects and configures the physical GPI input associated to the ON-AIR

function.

• GPO ONAIR, selects and configures the physical GPO output associated to the ON-AIR

function.

• LINE, for dual line hybrids or audio-codecs, this identifies line 1 and line 2, to assign the

different GPIs and GPOs for remote control

• EDIT CONFIGURATION allows you to modify the selected configuration.

• OK, accepts configuration.

• CANCEL, cancels configuration.

NOTE: For Codecs it is necessary to program at least two programmable keys per channel.

One to share the GPI WAIT and RING and a GPO for WAIT. The second key should have a

GPI and a GPO for the ON-AIR function.