User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS

• NAME OF THE CHANNEL

• ROUTING, activate or configure the access keys to routing that are available above

each fader channel of the AEQ FORUM control surface.

• BALANCE / PANORAMA, manages the balance or panoramic control for this input

channel.

• BUTTONS, to select the initial status of the PFL (CUE) or CHANNEL ON / OFF buttons

of the AEQ FORUM control surface.

• DIGITAL GAIN, using a graphical representation of a sliding fader, controls the input

gain of the selected channel from-12dB to +12 dB.

• FADER

• COMPRESSOR/LIMITER activates configures or deactivates the Compressor / Limiter

for the selected channel. To configure the Compressor/Limiter, please refer to section

4.3.4.1 of this manual.

• NOISE GATE activates, configures or deactivates the Noise Gate for the selected

channel. To configure the Noise Gate, please refer to section 4.3.4.2 of this manual.

• EQUALIZER activates, configures or deactivates the Equalizer for the selected channel.

To configure the Equalizer, please refer to section 4.3.4.3 of this manual.

• FILTER activates, configures or deactivates the High-pass or Low-pass Filters for the

selected channel. To configure the High-pass or Low-pass Filters, please refer to

section 4.3.4.4 of this manual.

• OK, accept configuration.

• CANCEL, cancels the configuration.

4.3.5.2. Advanced Settings OUTPUTS

Within the advanced settings screen CONFIGURE INPUTS, OUTPUTS AND MIXERS, the

column on the left shows the complete list of all the units available audio input channels.

• OUTPUT, as an internal control, numeric identifier for the input.

• LABEL, name associated to the channel.

• CONFIG, allows you to configure the specific options for the channel through a

dedicated screen. To access, first click on the text “Click to [CONFIG] and then on the

new CONFIG button that will appear.

Snapshot Output settings.

From left to right and from top to bottom the options available on screen are:

• NAME OF SNAPSHOT

• NAME OF THE CHANNEL

• DIGITAL GAIN, using a graphical representation of a sliding fader, controls the input

gain of the selected channel from-12dB to +12 dB.

• OK, accepts the configuration.

• CANCEL, cancels the configuration.