User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS
9
2.1.1.4. CUE
Pre-fader listen to the audio channel for monitoring and control. When activated the integrated
LED is lit. It is possible to send various audio signals to the CUE bus.
There is the option of setting one of the keys on the Control and Monitoring section (C & M) as a
general CUE RESET that disconnects all active signals from the CUE bus.
CUE signal associated controls
A CUE speaker is built-in in the upper right of the control surface and beneath the ventilation
grille and the volume control is through an encoder in the control and monitoring section of the
control surface.
2.1.1.5. Indicators of active processes
Under the CUE button are four blue LEDs with corresponding labels, from left to right and top to
bottom; EQ – Equalizer, BAL - balance, DYN - dynamic processor, and GAIN. The status
indicates the activation of any of the four processes mentioned.
.
Active processes lights
CUE SELECTION CUE RESET CUE SPEAKER
CUE SEND TO SRM, SHP,
CRM and CRHP