Operating instructions

channel pan effect panorama control
left: channel 1,
mid: channel 1+2,
right: channel 2
return effect return control, adds internal effect
power mains indicator
pre master level control for L-out,
R-out and record ch1/ch 2 out
master level control for the overal
acoustiCube 3
C
-3-
3. Operating Elements
Channel 2 same as channel 1
Input 2 input channel 2
Input 1 input channel 1
LED chain chain display for status and pre-amp choice
Clip overload indicator
Mute channel mute indicator
Piezo sources with piezo level, instruments
with passive pick-up systems only
Line sources with line-level,
instruments with active pre-amps and/or
magneticpickups
9V phantom supply for line function
is switched on when mode switch is
pressed in line modus for three seconds
mic sources with mic-level,
balanced and unbalanced
48V phantom supply 48V for mic function
is switched on when mode switch is
pressed in mic modus for three seconds
E/P Electret-microphone/Piezo pick-up
mode tip switch for input mode section
pad switch to adjust input sensitivity
gain input level control
colour switch to activate mid-range contour filter
mute mute control switch
Bass tone control for bass
middle tone control for mid-range
treble tone control for treble
program continuous program-selector encoder with
memory-function, internal effect
input 2
input 1
clip piezo 9 V 48 V
mute line mic e/p
mode
pad
colour
mute
gain bass middle treble
mute
channel 1
clip piezo 9 V 48 V
mute line mic e/p
mode
pad
colour
mute
gain bass middle treble
mute
channel 2
program
channel
pan
power
acoustiCube 3
2. 1
return
pre master
master
Front side, module (from left to right):