User Manual

RECON Water Heaters Installation, Operation & Maintenance Manual
CHAPTER 8 – WATER HEATER MANAGEMENT
OMM-0103_0A AERCO International, Inc.  100 Oritani Dr.  Blauvelt, NY 10913 Page 131 of 178
GF-147 Phone: [phone] PRI: 10/28/2014
Figure 8-5: Actuator-Controlled Sequencing Valve (92093)
The Actuator Housing contains a cover which is removed by simply loosening a single captive
screw. Removing the cover provides access to a PC Board containing wiring connections and
control circuitry components as shown in Figure 8-6.
The components on the PC board include DIP switches which are preset at the factory and
should not be changed unless instructed to do so.
4-PIN
CONNECTOR
COVER SCREW
ACTUATOR
LINKAGE
HANDLE
BRASS BALL
VALVE