Operation Manual

TO SET - DIVE TIME REMAINING ALARM

(while in the Surface Mode)

Factory set for 0:00 (minutes), the Dive Time Remaining Alarm can

be set to values between 0:00 and 0:20 (minutes) in increments of 1

minute.

 Press Both buttons simultaneously, release when SET: 2 appears.

 Press and release the Advance (Front) button, the Units screen ap-

pears with the set point flashing.

 Press the Advance (Front) button 11 more times.

 The graphic dtr and Alarm and Dive Mode icons appear with the

Dive Time Remaining value flashing (Fig. 34).

 Press and hold the Select (Bottom) button to scroll through the

Alarm values.

 Press the Advance (Front) button to accept the setting and ad-

vance to Set Max PO2 Alarm, or press and hold Both buttons for 2

seconds to revert to Surface Mode.

Fig. 34 - Set Dive Time Remain-

ing Alarm