Operation Manual

CARE AND CLEANING

Protect your ATMOS

from shock, excessive temperatures, chemi-

cal attack, and tampering. Protect the lens against scratches with an

Aeris Instrument Lens Guard. Small scratches will naturally disap-

pear underwater.

CAUTION: Never spray aerosols of any kind on, or

near, the instrument. The propellants may chemi-

cally attack the plastic.

 Soak and rinse the ATMOS

in fresh water at the end of each

day of diving, and check to ensure that the areas around the low

pressure (depth) sensor (Fig. 87a), download interface Data Port

(Fig. 87b), and buttons are free of debris or obstructions.

 To dissolve salt crystals, use lukewarm water or a slightly acidic

white vinegar/water bath.

 After removal from the bath, place the unit under gently running

water and towel dry before storing.

 Transport your unit cool, dry, and protected.

WARNING: Never force any object through any

slots or holes of the Housing. Doing so may dam-

age the depth sensor, possibly resulting in errone-

ous depth and/or dive time remaining displays.

Fig. 87 -Case Back