Operation Manual

Fig. 89 - Battery Compartment

 Closely check the threads of the Battery Hatch and the Housing

for any signs of damage that might impair proper threading. If

found, return your module to your Authorized Aeris Dealer, and

DO NOT attempt to use it until it has received factory service.

WARNING: DO NOT attempt to disassemble any

other portion of the module. Doing so may cause a

dangerous malfunction, resulting in possible injury

or death. Indication of tampering with the module

will void the unit's warranty.

 Turn the unit over to drop out the Battery. Discard of properly.

 Check the metal contacts inside the Battery Compartment (Fig.

89a) for any signs of stress (bending or breakage) and any signs of

corrosion indicating entrance of moisture. If found, return the

module to your Authorized Aeris Dealer for inspection.

If water or corrosion is found, and you are attempting a repair in the

field, proceed as follows:

 Inspect the Lens, Case, and Button areas to ensure there is no

damage or cracks.

 Check the O-ring seating surfaces for nicks, cuts, or divots.

 Flush the Battery Hatch and Compartment with a solution of 50%

white vinegar and 50% fresh water. Rinse thoroughly with fresh

water and allow to air dry overnight, or blow dry with a hair dryer

set at No Heat.