Operation Manual

13
Atmos Pro/Aeris 300G
FT
MAX
FT
N
I
T
R
O
G
E
N
O
X
Y
G
E
N
Single Long Beep (Permanent Violation)
• Depth was shallower than a required stop depth for more than 5 minutes.
• Required Decompression exceeds a 60 FT/ 18 M ceiling.
• Five minutes after a conditional violation on the surface.
Short Beep (Transition)
To indicate that a command has been accepted.
• Immediately following activation and the Diagnostic Mode.
BACKLIGHT FEATURE
The Atmos Pro/Aeris 300G backlight illuminates the upper and lower screens
of the computer module (Fig. 13), and the pressure gauge of the Aeris 300G.
To activate the backlight while in the Surface mode or Time/Date mode, or
while in a dive mode, press the Select (Right) control button. The screens will
be illuminated for 5 seconds. Release and press again as desired.
Aeris recommends that you always carry primary and backup dive
lights when conducting dives that could include low light situations.
BEEEEEEP!
(Violation)
Fig. 13 - Backlight
(Transition)
BEEP!
R1