Operation Manual

SURFACE SET MODES

Set Mode Sequence:

SURF MAIN >> SET A >> SET U >> SN (serial number)

Access and step through of the sequence is gained by repeated simultaneous 2

second presses of the A and S buttons.

SET A (Alarms) and SET U (Utilities) Set Points can also be changed using the PC

Settings Upload portion of the ACI PC Interface program.

SET A GROUP (ALARMS)

Set A Sequence:

AUD >> SRT >> EDT >> RDI >> DD 1 >> DD 2 >> DD 3

• Depressing the A and S buttons simultaneously for 2 seconds while the SURF

MAIN screen is displayed will access the Set A screen (Fig. 43).

> Settings remain at the values set until changed.

The Set AUD feature provides complete OFF control of the

Audible and its associated red LED warning light. When AUD

is set OFF, no beeps will be emitted and the light will not flash

when an alarm condition occurs, which some divers prefer

during select activities. Icons and messages will still flash and

the Backlight will still come On.

Fig. 43 - SET A