SAVE THIS MANUAL FOR WARRANTY PURPOSES! For additional assistance please contact us at: Technical Support (Toll Free) 877-254-7093 OR info@aero-stream.
Permits Prior to the installation of the product, the installer must obtain any and all required State and local permits. The installer must strictly comply with all pertinent State and local requirements. Failure to comply with these requirements is a violation of state and municipal codes. Read and Keep This Manual Completely read these instructions before starting the installation.
Unpack and Inspect Parts Remove and identify the product from the package and check for any missing or damaged parts. Handle the parts carefully! The Housing and sintered diffuser are fragile and can be easily damaged. Please note that your products may vary from photos in this manual. Housing with Power Cord • (1) Hose Clamp 3 © Copyright Aero-Stream, LLC 2003-2015 102631 Rev.
Manufacturer’s Limited Warranty Specifications of Aero-pond® Systems DISCLAIMER, DURATION, AND SCOPE OF THIS WARRANTY Urban Pond™ Garden Pond™ Model # AS800E P/N 102516 dimensions: 12” x 14” x 10” power cord: 6’ power: 120 V diffuser: 1 - 9” Sintered non-clogging bubble diameter: 2000 microns compressor: 90 W efficiency: (gal/W) 22 sound proofing: 39 dBA maximum depth*: 6 ft. air line: 20 ft. 3⁄8” I.D.
Installation Notes: IMPORTANT! If the grounded electrical outlet is not protected by a GFCI outlet or circuit breaker, a plug-in GFCI device must be purchased and installed. 1) Diffuser a) Urban Pond™ Most Common Questions and Tips: • In the event of a temporary or extended power failure check the GFCI device and reset if the Housing is not running. Maintenance and Care: WARNING: This product has no user serviceable parts. If ® service is required, call Aero-Stream .
DANGER: Improper installation of the grounding plug can result in a risk of electric shock. If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire. Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the product is properly grounded.