Specification Sheet

ABF110 G16 SERIES
Ventilation Fan
Description:
Ventilating fan shall be low noise,
ceiling mount engineered for continu-
ous operation. Suitable for new
construction or remodeling. Fan
shall be ENERGY STAR qualified
and certified by the Home Ventilating
Institute (HVI). ETL/cETL listed for
use in insulated ceilings (TypeI.C.).
Motor/Blower:
• Permanently lubricated high
performance AC motor.
• Engineered for continuous
operation.
• Power rating shall be 120v/60Hz.
• Fan shall be UL and cUL listed
for tub/shower enclosure when
GFCI protected.
• Motor equipped with thermal
shut-off.
Housing:
• Galvanized Steel Body
• Duct connector adapts to 4”, 5”
and 6” ductwork.
• Built-in damper
• Articulating and expandable
anti-vibration brackets included.
• Designed for installation in
ceilings with a minimum of 8”
clearance.
Grille:
Low maintenance, attaches to housing
with torsion springs. Round on square
design.
Finishes: White (W), Satin Nickel
(SN), Satin Gold (SG), Oil Rubbed
Bronze (OR), Farmhouse Black
Ventilating Area:
For bathrooms up to 110 square feet.
Warranty:
6 Years when installed by licensed
professional.
Architectural Specifications:
Ventilation fan will be ceiling mount,
ENERGY STAR qualified, with no less
than 110CFM and no more than 1.1
Sones as certified by HVI at 0.1 static
pressure in inches water gauge. Pow-
er consumption shall be no greater
than 24.5 watts and ENERGY STAR
rated with an efficiency rating of no
less than 4.56 CFM/watt. The motor
will be permanently lubricated, engi-
neered for continuous operation. Duct
diameter will be 4”, 5” or 6” round.
Fan shall be listed for tub/shower
enclosure when used with GFCI
branch circuit wiring and shall be ETL/
cETL listed for use in insulated ceil-
ings (Type I.C.). Fan shall be
ASHRAE 62.2, LEED, California Title
24 and Washington VIAQ compliant.
813 Ridge Lake Blvd., Ste. 210 Memphis, TN 38120
843.377.8642 www.aeropurefans.com
FHB OR
SG
SN W