Installation Instructions

Operation and Precautions

IMPORTANT SAFETY INSTRUCTIONS

Proper installation and usage of your Aero-Spa™ Ozone Generator is

your responsibility. Read and follow this Installation Guide carefully for

important installation, operation and safety information. Basic safety

precautions should always be followed, including but not limited to

the following:

 Read and follow all instruction.

 Never operate Aero-Spa™ equipment indoors.

 Do not use hot tub for 30 minutes after the Aero-Spa™ unit

has operated.

 Never inhale ozone exhausted by Aero-Spa™ unit.

 Follow all electrical installation instructions in this installation

guide.

 Do not operate Aero-Spa™ unit unless the electrical source is

protected by a Ground Fault Circuit Interrupt (GFCI) device.

 Do not use the Aero-Spa™ unit for applications other than

those described in this installation guide.

 Follow all applicable electrical codes.

 WARNING - To reduce the risk of electrical shock, do not use

this product if it has a damaged cord. Call Aero-Spa™

immediately to get the product repaired.

 Mount the Ozone Generator so that it is inaccessible to anyone

in the hot tub.

 Never attempt servicing when wet.

 Do not allow children to operate the Aero-Spa™.

 Plastic ozone supply tubing is available with the Ozone

Generator. Never replace this tubing with metal tubing.

 Trace amounts of hydrochloric acid may be present in the ozone

tube. Avoid contact with eyes, skin and clothing.

SAVE THESE INSTRUCTIONS.