Instructions / Assembly

5
Pipe Sections 6”-18”:
1.) Assemble connector flange by interlocking the four sections as shown in Fig 4.
2.) Apply 77” of butyl sealant to the top of connector, overlapping and kneading the joined ends
of the butyl rope together. (Fig. 5)
3.) Center the riser pipe on the connector flange so the inside gap is even all of the way around.
When the even gap is achieved, lower the riser pipe onto the butyl rope. As required, make
final adjustment and apply firm downward pressure to seat the riser pipe into the butyl
sealant. Apply downward pressure all around riser pipe. (Fig. 5)
Figure 4: Assembly of connector flange
Figure 5: Installing butyl & pipe to connector
77” butyl sealant
Connector flange
Pipe