User guide

ManualsBrandsAeroBed ManualsFurnitureRechargeable Dual Power NiCd Battery Power Model 109 DC

LIMITED EXPRESS WARRANTY

Aero Products International, Inc. (“us”) warrants to the original purchaser (“you”) that the AeroBed (“product”) is guaranteed against defects in materials and

workmanship for the following periods: pump and valve, one (1) year from date of purchase; mattress, one (1) year from date of purchase.

OUR EXCLUSIVE OBLIGATION, AND YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY OR OTHERWISE SHALL BE THE

REPAIR OR REPLACEMENT OF ANY PRODUCT OR PARTS WHICH MAY PROVE DEFECTIVE UNDER THE CONDITIONS AND DURING THE PERIODS

DESCRIBED ABOVE AT OUR SOLE COST AND EXPENSE. IN THE EVENT THE PRODUCTS OR PARTS CANNOT BE REPAIRED OR REPLACED, YOU

SHALL RECEIVE A FULL REFUND OF THE PURCHASE PRICE AT OUR OPTION. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND

YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Exclusions

Our obligation under this limited express warranty shall not apply if our inspection shows:

A. That the product is used for other than normal indoor sleeping purposes.

B. Any product or part has been damaged by alteration.

C. Any product or part has been subject to accident, misuse, abuse or has been operated contrary to our written instructions.

Warranty Redemptions

You must obtain an authorization from us before returning a defective product. Call us at 1-888-702-8281 or write us at Aero Products International, Inc., 1834

Walden Office Square, Third Floor, Schaumburg, IL 60173 for a return authorization. The product should be carefully packaged and delivered postage or delivery

charges prepaid at the address set forth above. You are responsible for all damages incurred in shipping.

Warranty Disclaimer

EXCEPT FOR THE LIMITED EXPRESS WARRANTY SET FORTH IN THIS SECTION, OR ANY IMPLIED WARRANTIES PERMITTED UNDER APPLICABLE LAW,

SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATIONS. ALL CLAIMS AGAINST US MUST BE BROUGHT WITHIN ONE (1) YEAR FROM THE TIME

THEY ARISE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE DISCLAIMER MAY NOT APPLY

TO YOU.

Limitation of Liability

TO THE FULLEST EXTENT PERMITTED BY LAW, SELLER SHALL NOT BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES

WITH RESPECT TO THE SALE OF USE OF THE PRODUCTS, INCLUDING ANY LOST REVENUES, LOSS OF USE OR LOST PROFITS, REGARDLESS OF THE

THEORY BY WHICH ANY CLAIM MAY BE BASED, INCLUDING ANY TORT, TANGIBLE PROPERTY DAMAGE OR STATUTORY CAUSES OF ACTION. NOTWITH-

STANDING THE TERM OF ANY LIMITED OR IMPLIED WARRANTY, OR IN THE EVENT THAT ANY LIMITED WARRANTY FAILS OF ITS ESSENTIAL PURPOSE,

IN NO EVENT WILL OUR ENTIRE LIABILITY TO YOU EXCEED THE PURCHASE PRICE ACTUALLY PAID BY YOU FOR THE PRODUCTS, OR ANY DEFECTIVE

OR NONCONFORMING PORTION THEREOF, WHICHEVER IS THE LESSER AMOUNT.

THIS LIMITATION DOES NOT APPLY TO ANY CLAIMS FOR PERSONAL INJURY. THIS AGREEMENT AND ANY CLAIMS AND DISPUTES BETWEEN THE

PARTIES SHALL BE GOVERNED BY AND SUBJECT TO THE INTERNAL LAWS (EXCLUSIVE OF THE CONFLICTS OF LAW PROVISION) AND DECISIONS OF

THE COURTS OF THE STATE OF ILLINOIS. THE EXCLUSIVE VENUE AND JURISDICTION FOR ALL CLAIMS AND DISPUTES SHALL BE THE STATE OR

FEDERAL COURT LOCATED IN SCHAUMBURG, ILLINOIS.

Aero Products International, Inc. neither assumes nor authorizes any representative or other person to assume any obligation or liability other than those expressly set

forth herein.

This product may be covered under one or more of the following U.S. and/or foreign patents: U.S. Pat. Nos. 4,977,633; 5,267,363; 5,367,726; 6,237,621; 6,508,264;

6,598,626; 6,701,559 ; 6,755,208; 6,986,360; 6,996,867; 7,025,576; 7,039,972; 7,165,283; D464,225; D490,635; D513,145; CN 1809683.2; RU 2271129;

SG93011; EP 0 487 641 ; DE 69024962.4; EP 0 947 152; DE 69233298.7; EP 0 605 624 ; DE 69230797.4; JP 3,419,774; TW 62301; AU 731613; BR PI9710873-1;

CN 97196557.9 ; HK 1025374; MX 216898; MX 242683; NZ 334203; SG 61207; JP 2010828; EP 1 359 325; EP 1 415 576. Other U.S. and foreign patents pending.

Made in China.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR

EXCLUSION MAY NOT APPLY TO YOU.

TROUBLESHOOTING

Very rarely, your Aero

Sport bed may fail to inflate properly. Should this occur, please use the following check list.

1. Check to make sure your pump is fully charged.

2. If your bed deson’t appear to be inflating:

First, make sure the Quick Air Release Valve is closed.

If the valve is open, close it by using 2 thumbs to push cover firmly into valve. Be careful to avoid pushing valve cover to

right or left as it snaps into valve opening.

3. If air leakage from the Quick Air Release Valve occurs:

Carefully, inspect the soft round gasket on the inside of Quick Air Release Valve cover. Make sure there is no dirt or debris,

cuts, nicks, or tears to the gasket. If there is dirt or debris; clean and use. If cut, nicked or torn, call our Customer Service

Center or visit our website to order a replacement part.

4. If trouble persists, please phone our Customer Service Center for assistance.

U.S.: 1-888-462-4468

Monday through Friday, 9 AM to 5 PM Central Standard Time

Canada: 1-888-702-8281

or visit our website at: www.aerobed.com

DEFLATION AND STORAGE

1. Open the Quick Air Release Valve cover at the head of the bed to release the air.

2. Fold sides of bed into the center along its length. Tightly roll your bed towards the Quick Air Release Valve at the end of the bed.

3. Roll the bed completely until all air is expelled. When the bed is completely rolled, push the Quick Air Release Valve closed and locked for its

next use.

4. Slide the duffel bag over your AeroBed. Store your bed and pump until its next use.

CARE AND MAINTENANCE

1. Inspect your bed prior to each use.

2. Keep your bed away from any sharp objects or obstacles with rough edges. Large cuts or snags may not be repairable and will not be covered

by your bed warranty.

3. When not in use, store your bed in a clean, dry place out of extreme temperatures. Note: Bed must be at room temperature prior to inflating or

it may cause air leaks.

4. In case of incidental damage to your bed, a repair patch has been included. Please follow repair instructions carefully.

CLEANING

We recommend that you do not let the plush surface on top of your bed get wet. Repeated exposure to water or other liquids may cause damage to the plush surface

that will not be covered by your warranty. Should liquid come in contact witht the plush surface, blot liquid dry and use a damp cloth to remove any stains. Let surface

air dry completely.

You may clean the PVC on the sides and bottom of your bed with a mild dishwashing detergent or household cleaner. Do not use strong chemicals or other

compounds. Allow your bed to air dry completely after cleaning and before storing.