User's Manual

5
55
5/
//
/8/2007
8/20078/2007
8/2007 23
2323
23
Where:
Where:Where:
Where:
Data1 =
00 for Server in Normal Operation
01 for Client in Normal Operation
02 for Server in Acquisition Sync
03 for Client in Acquisition Sync
4.5.2
4.5.24.5.2
4.5.2 Change Channel with Forced Acquisition Sync
Change Channel with Forced Acquisition SyncChange Channel with Forced Acquisition Sync
Change Channel with Forced Acquisition Sync
The Host issues this command to change the channel of the transceiver and force the
transceiver to actively begin synchronization.
Host Command:
Host Command:Host Command:
Host Command:
Byte 1 = CCh
Byte 2 = 02h
Byte 3 = RF Channel Number (Hexadecimal)
Transceiver Response:
Transceiver Response:Transceiver Response:
Transceiver Response:
Byte 1 = CCh
Byte 2 = RF Channel Number (Hexadecimal)
4.5.3
4.5.34.5.3
4.5.3 Server/Client
Server/ClientServer/Client
Server/Client
The Host issues this command to change the mode (Server or Client) of the transceiver and
can force the transceiver to actively begin synchronization.
Host Command:
Host Command:Host Command:
Host Command:
Byte 1 = CCh
Byte 2 = 03h
Byte 3 = Data1
Where:
Where:Where:
Where:
Data1 =
00 for Server in Normal Operation
01 for Client in Normal Operation
02 for Server in Acquisition Sync
03 for Client in Acquisition Sync
Transceiver Response:
Transceiver Response:Transceiver Response:
Transceiver Response:
Byte 1 = CCh
Byte 2 = Firmware Version Number
Byte 3 = Data1
Where:
Where:Where:
Where:
Data1 = Data1 from Host Command