User Manual

50289-BDA

USE OR DISCLOSURE OF DATA CONTAINED ON THIS PAGE IS SUBJECT TO THE

RESTRICTION ON THE TITLE PAGE OF THIS MANUAL

TIME-OUT DURATION

The time-out duration is how long a channel can be held open (keyed on) for a

retransmission. An inadvertent or intentional “key and hold” action without any voice

communication will not disable the channel because of this feature. The time-out

duration can be up from 1 second to 99 minutes 59 seconds in 1 second intervals. The

time-out duration can be disabled by setting it to 00 minutes 00 seconds. When disabled,

the channel will key continuously with the presence of a received signal.

SETTING A TIME-OUT TIME

To set a time-out time, click the function button Time Out at the bottom of the main

screen, a time-out setting board appears as displayed in Figure 25 below. Select the

desired time-out time up to 99 minutes (MM) and 59 seconds (SS) and then click Set with

the mouse button. Setting 00 minute and 00 second disables the Time-out function. If the

Set button is not clicked, the setting in place upon entry to the window remains in effect.

Click Exit button on the setting board to go back to the main screen.

Figure 25. Set Time Out windowFigure 25. Set Time Out window