User's Manual
Table Of Contents
- Part Number
- Overview
- AC4424 Specifications
- Specifications
- Configuring the AC4424
- EEPROM Parameters
- EEPROM Configuration Commands
- On-the-Fly Control Command Reference
- Status Request
- Change Channel with Forced Acquisition Sync
- Server/Client Command
- Power-Down Command
- Power-Down Wake-Up Command
- Broadcast Mode
- Read Static Bank #1 Byte
- Write Static Bank #1 Bytes
- Read Static Bank #2 Bytes
- Write Static Bank #2 Bytes
- Write Destination Address
- Read Destination Address
- Temperature Update
- Theory of Operation
- Application Examples
- Dimensions
- Ordering Information
12/09/02
12/09/0212/09/02
12/09/02
6
66
6
FCC INFORMATION
FCC INFORMATIONFCC INFORMATION
FCC INFORMATION
RF Exposure AC4424
RF Exposure AC4424RF Exposure AC4424
RF Exposure AC4424-
--
-10
1010
10
RF Exposure AC4424
RF Exposure AC4424RF Exposure AC4424
RF Exposure AC4424-
--
-100
100100
100
RF Exposure AC4424
RF Exposure AC4424RF Exposure AC4424
RF Exposure AC4424-
--
-200
200200
200
WARNING:
WARNING: WARNING:
WARNING:
To comply with FCC RF Exposure requirements, the Original Equipment
Manufacturer (OEM) must ensure that Antennas 3, 4, 5, 6 and 7 in the previous
table must be installed and/or configured to operate with a separation distance
of 20cm or more from all persons to satisfy RF Exposure compliance.
The preceding statement must be included as a CAUTION statement in
manuals for products operating with Antennas 3, 4, 5, 6 and 7 in the previous
table to alert users on FCC RF Exposure compliance.
WARNING:
WARNING: WARNING:
WARNING:
To satisfy FCC RF exposure requirements for mobile and base station
transmitting devices, a separation distance of 32cm or more should be
maintained between the antenna of this device and persons during operation.
To ensure compliance, operations at closer than this distance is not
recommended.
The preceding statement must be included as a CAUTION statement in
manuals for OEM products to alert users on FCC RF Exposure compliance.
WARNING:
WARNING: WARNING:
WARNING:
To satisfy FCC RF exposure requirements for mobile and base station
transmitting devices, a separation distance of 20cm or more should be
maintained between the antenna of this device and persons during operation.
To ensure compliance, operations at closer than this distance is not
recommended.
The preceding statement must be included as a CAUTION statement in
manuals for OEM products to alert users on FCC RF Exposure compliance.