User's Manual

Revisions Description

Version 1.0 Initial Release Version - 01/20/2000

Version 2.0 Not Released

Version 3.0 Release Version - 2/15/2000

Full Document Update – major changes:

1. The Transmit Sync byte has been changed

2. The previous version called out RTS rather than TE for the Transmit Enable

pin. This has been corrected

Version 3.1 Release Version - 5/23/2000

1. Corrected Serial Interface data rate to 57,600bps maximum

2. Add specifications on LX2400S-10 and LX2400S-10A

3. Add ordering information

Version 3.2 Release Version - 8/1/2000

1. Corrected RF data rate to 144,000bps maximum

2. Corrected Frequency band to 2.402GHz – 2.478GHz

3. Added new column to Table 2. Now shows 3mW & 10mW defaults

4. Corrected hop time from 120ms to 100ms

5. Added current consumptions specifications for LX2400S-10(A)

6. Changed Input Voltage tolerance from 5% to 2%

7. Updated Table 2 with new Control Bit definitions

8. Updated Section 3.2.6.1.5 to include Control Bit definitions

9. Updated FCC section.

Version 3.3 Release Version - 9/14/2000

1. Update approved antenna table and Agency Requirements

2. Correct product and developer kit part numbers

AeroComm, Inc.

This material is preliminary.

Information furnished by AeroComm in this specification is believed to be accurate. Devices sold by

AeroComm are covered by the warranty and patent indemnification provisions appearing in its Terms of

Sale only. AeroComm makes no warranty, express, statutory, and implied or by description, regarding the

information set forth herein. AeroComm reserves the right to change specifications at any time and without

notice.

AeroComm’s products are intended for use in normal commercial applications. Applications requiring

extended temperature range or unusual environmental requirements such as military, medical life-support or

life-sustaining equipment are specifically not recommended without additional testing for such application.