User guide

Wireless Solutions
Texas Instruments
9
TEXAS INSTRUMENTS Wireless Modules
The CC1020 single chip transceiver and the CC1070 single chip transmitter provide extensive features and great
exibility, which make the chips suitable for a very large number of applications and system requirements. The CC1020
and CC1070 are especially suited for narrowband systems. The CC10x0EM evaluation kit used in combination with
a CC1020-C1070DK development kit is primarily designed to make it easy for designers to evaluate transceiver and
transmitter performance and in a minimum of time develop their own applications.
The CC259x RF Front End includes PA, LNA, switches, balun, RF matching network and inductor, and will increase
output power and improve receiver sensitivity on a 2.4 GHz low-power RF solution. The CC2430 is an IEEE 802.15.4
compliant System-on-Chip with radio, MCU and Flash.The CC2430-CC259xEMK consists of two CC2430-CC259xEM
Evaluation Modules. These modules can be used together with a SmartRF®04 Evaluation Board to evaluate the chip,
do RF testing and for prototyping. Also the output power can be increased to around +20dBm, and sensitivity will be
improved by up to 6 dB compared with the CC2430 stand alone evaluation module.The CC2430-CC259xEMK should
be used together with a SmartRF04EB Evaluation Board, which is included in the CC2430DK Dev Kit.
•
Evaluate the SmartRF®04 products. Right out of the box, the user can do range testing (PER testing) and transfer
data from one PC to another using the SmartRF®04DK. This enables the user to quickly nd out how well the
SmartRF®04 products t the intended application. A number of demonstration applications serve to highlight the
innovative features of the SmartRF®04 ICs.
•
Perform RF measurements. Using SmartRF® Studio, the user can congure the radio ICs with parameters that suit
the intended application and easily measure sensitivity, output power and other RF parameters.
© Copyright 2011 Mouser Electronics
© Copyright 2011 Mouser Electronics
The eZ430-RF2480 Demo Kit* is a complete USB-based MSP430 wireless demonstration tool providing all
the hardware and software to evaluate the CC2480 2.4GHz ZigBee network processor and the MSP430F2274
microcontroller. Our demonstration kit has everything needed to understand and fully evaluate the capabilities of
CC2480 in a short amount of time with minimal effort.
The eZ430-RF2500 is a complete wireless development tool for the MSP430 and CC2500 that includes all the hardware
and software required to develop an entire wireless project with the MSP430 in a convenient USB stick. The tool
includes a USB-powered emulator to program and debug your application in-system and two 2.4-GHz wireless target
boards featuring the highly integrated MSP430F2274 ultra-low-power MCU.
The eZ430-RF2500-SEH is a complete Solar Energy Harvesting development kit to help create a perpetually powered
wireless sensor network based on the ultra-low-power MSP430 microcontroller. The Solar Energy Harvester module
includes a high-efciency solar (2.25x2.25”) panel optimized for operating indoors under low-intensity uorescent lights,
which provides enough power to run a wireless sensor application with no additional batteries. Inputs are also available
for external energy harvesters such as thermal, piezoelectric, or another solar panel.
The eZ430-RF2500T is an additional wireless target board for the eZ430-RF2500 wireless development tool. The
eZ430-RF2500T uses the MSP430F2274 which combines 16-MIPS performance with a 200-ksps 10-bit ADC and
2 op-amps and is paired with the CC2500 2.4 GHz multi-channel RF transceiver designed for low-power wireless
applications.
The CC2430EMK consists of two CC2430 Evaluation Modules. These modules can be used together with a
SmartRF®04 Evaluation Board to evaluate the chip, do RF testing and for prototyping.Together with the PC software
SmartRF® Studio it is easy to evaluate the chip. From SmartRF® Studio all register on the chip can be accessed and
simple packet testing can be done between two boards. This allows for simple range testing between two PCs. It is also
possible to use the packets sniffer software with this setup.
CC2430 Demonstration board is based on TI’s CC2430, a System-on-Chip solution for IEEE 802.15.4 and ZigBee™
applications. The CC2430DB includes many useful peripherals, e.g. light sensor, LEDs, joystick, potentiometer and
accelerometer, which make it useful for prototyping. The CC2430DB can also be used as an In Circuit Emulator and
programmer for custom boards. In addition to this it can be used as a packet sniffer together with TI’s packet sniffer
software to monitor trafc over the air.
The CC2430ZDK is designed to deliver the most powerful elements for ZigBee™ development in the market today.
The kit is based on the CC2430 System-on-Chip, which includes the core of the CC2420 transceiver, an 8051
controller, ash memory and lots of useful peripherals. The Sensor Network Analyzer from Daintree is bundled with
this development kit. More than a sniffer, the SNA is a comprehensive and powerful solution that takes you from
development through to testing, commissioning and maintenance.
The CC2431DK Development Kit includes a sample application for location calculation and demonstration.
The SmartRF®04DK Development Kit includes a number of functions and applications that allows quick testing of
the RF interface and peripherals of the chip. *Evaluate the SmartRF®04 products. Right out of the box, the kit can be
used for range testing.
•
Evaluate the CC1110Fx and CC1111Fx. Right out of the box, the user can do range testing (PER testing) between
two development boards with or without using a PC. This enables the user to quickly nd out how well the
CC1110Fx ts the intended application. A number of demonstration applications serve to highlight the innovative
features of the SmartRF®04 ICs.
•
Perform RF measurements. Using SmartRF® Studio, the user can congure the radio ICs with parameters that
suit the intended application and easily measure sensitivity, output power and other RF parameters.
•
User SmartRF® Studio to perform RF measurements.
•
Evaluate the SmartRF®04 products. Apply power to the boards and the plug and play kit can be
used for range testing.
•
User SmartRF® Studio to perform RF measurements.
•
The radio can be easily congured to measure sensitivity, output power, and other RF parameters.
•
Evaluate the SmartRF®04 products. Right out of the box, the user can do range testing (PER testing) and transfer
data from one PC to another using the SmartRF®04DK. This enables the user to quickly nd out how well the
SmartRF®04 products t the intended application. A number of demonstration applications serve to highlight the
innovative features of the SmartRF®04 ICs.
•
Perform RF measurements. Using SmartRF® Studio, the user can congure the radio ICs with parameters that
suit the intended application and easily measure sensitivity, output power and other RF parameters.
The CC2431EMK consists of two CC2431 Evaluation Modules. These modules can be used together with a
SmartRF®04 Evaluation Board to evaluate the chip, do RF testing and for prototyping. Together with the PC software
SmartRF® Studio it is easy to evaluate the chip. From SmartRF® Studio all register on the chip can be accessed and
simple packet testing can be done between two boards. This allows for simple range testing between two PCs. It is
also possible to use the packets sniffer software with this setup. The pin rows on the SmartRF®04EB can easily be
connected to an existing system for prototyping.
The CC2591 RF Front End includes PA, LNA, switches, balun, RF matching network and inductor, and will increase
output power and improve receiver sensitivity on a 2.4 GHz low-power RF solution. The CC2520 is an IEEE 802.15.4
compliant RF transceiver.
The CC2520 Development Kit includes hardware and software that allows quick testing of the CC2520 RF performance
and offers a complete platform for development of advanced prototype RF systems and for evaluation of the CC2520
right out of the box. The kit can be used for range testing using the pre-programmed PER tester running on the
MSP430F2618.
The CC2431ZDK is designed to deliver the most powerful elements for ZigBee™ development with the location
engine in the market today. The kit is based on the CC2431 System-on-Chip, which includes the core of the CC2420
transceiver, an 8051 controller, 128 kByte ash memory and lots of useful peripherals. The hardware includes the
content of the CC2430ZDK and the CC2431DK. The dedicated CC2431 hardware can easily be used for testing the
location engine in ZigBee™ networks. Totally the kit includes 7 CC2430 boards that can be used for reference nodes
in a network and 10 CC2431 boards that are able to calculate their own position as well as act as reference nodes.
For a complete listing of Texas Instruments Low Power Wireless Development Tools visit www.mouser.com/ti
mouser.com/ti
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-CC1070EM-433 CC1070EM-433 SUB 1-GHz
595-CC1070EM-868 CC1070EM-868 SUB 1-GHz
839-1020EMXK-433 CC1020EMK-433 SUB 1-GHz
839-1020EMXK-868 CC1020EMK-868 SUB 1-GHz
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-CC1101DK433 CC1101DK433 SUB 1-GHz
595-CC1101DK868-915 CC1101DK868-915 SUB 1-GHz
595-CC1101EMK433 CC1101EMK433 SUB 1-GHz
595-CC1101EMK868-915 CC1101EMK868-915 SUB 1-GHz
595-CC2510EMK CC2510EMK 2.4 GHz, SIMPLICITI
595-CC2511EMK CC2511EMK 2.4 GHz, SIMPLICITI
839-1150EM-433 CC1150EMK-433 SUB 1-GHz
839-1150EM-868 CC1150EMK-868 SUB 1-GHz
839-2500/50DK CC2500-CC2550DK 2.4 GHz
839-2500EMK CC2500EMK 2.4 GHz
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-CC1110-CC1111DK CC1110-CC1111DK SUB 1-GHz
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-CC2520DK CC2520DK ZIGBEE-Software
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-EZ430-RF2480 EZ430-RF2480 ZIGBEE-Software
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-EZ430-RF2500 EZ430-RF2500 2.4GHz
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-EZ430-RF2500-SEH EZ430-RF2500-SEH 2.4GHz
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-EZ430-RF2500T EZ430-RF2500T 2.4GHz
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
839-2430DK CC2430DK 2.4GHz
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
839-2430EMK CC2430EMK 802.15.4 MAC, 2.4GHz
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
839-2431DK CC2431DK 2.4GHz, 802.15.4 MAC
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
839-CC2430DB CC2430DB 2.4GHz, 802.15.4 MAC
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
839-CC2430ZDK CC2430ZDK ZIGBEE-Software, 2.4GHz
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-CC2431EMK CC2431EMK 2.4GHz, 802.15.4 MAC
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-CC2520-CC2591EMK CC2520-CC2591EMK 2.4GHz, ZIGBEE-Software
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-CC2431ZDK CC2431ZDK 802.15.4 MAC, 2.4GHz, ZIGBEE-Software
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-CC1110EMK433 CC1110EMK433 SUB 1-GHz
595-CC1110EMK868-915 CC1110EMK868-915 SUB 1-GHz
MOUSER
STOCK NO.
Texas Instruments
Part No.
Product Group
Price
Each
595-CC2430-CC2590EMK CC2430-CC2590EMK 2.4GHz
595-CC2430-CC2591EMK CC2430-CC2591EMK 2.4GHz
[e-mail]