Installation manual

Model 8210A-2-5 IM-377

Aeroflex / Weinschel

2. SPECIFICATIONS:

DC Input

Connector: 2.5mm barrel style

Requirements: +5 Vdc @ 375 mA

Driver Interface

Connector: 14-pin 0.025" square post header @ 0.1"

centers. Mates with AMP 746285-2 or equivalent.

Signals : SDA serial data

SDC serial clock

VDC DC supply voltage

GND ground

VDC Output current: 2 A maximum

Maximum cable length: 10 Meters (1000 pF maximum capacitance)

Data Transfer Rate: 100 KHz

Environmental Operating Temperature: 0 to +50°C

Storage Temperature: 67° to +167 °F (-55° to +75°C)

Humidity: 95%

Altitude: 40,000’ (12,192M)

RS-232 Bus

(1)

Connector: 9-pin male D

Signals: TXD, RXD, RTS, CTS, DTR, GND

Baud Rates: 2400, 9600, 19200, and 38400

Data Bits: 8

Handshaking: None, RTS/CTS, XON/XOFF

Parity: None, Odd, Even

Indicators: Tx (Transmit) and Rx (Receive)

RS-422 Bus

(2)

RS-485 Bus

(3)

Connector: 9-pin male D

Signals: TXD+, TDX-, RXD+, RTX-, RTS+, RTS-, CTS+, CTS

Baud Rates: 2400, 9600, 19200, and 38400

Data Bits: 8

Handshaking: None, RTS/CTS, XON/XOFF

Parity: None, Odd, Even

Indicators: Tx (Transmit) and Rx (Receive Active)

NOTES:

1. RS-232 can be used with standard PC serial port for short and medium distances (up to approximately 50 ft).

2. RS-422, designed for very long distance communications (4000 ft) & optimized as a single node protocol, typically with one device

connected to a single port.

RS-485, designed for very long distance communications (4000 ft) & optimized for multi-drop connections that can used to

create a low cost network.