Installation manual

Model 8310-XX-X-XN IM-493
Aeroflex / Weinschel
20
- Trigger 1
Serial trigger input: disabled
Channel: 1
Match: 00,00
Trigger input1: X
Trigger input2: X
Trigger input3: X
Message :
Priority: L
Min. notification interval: 1 s
Re-notification interval : 0 s
- Trigger 2
Serial trigger input: disabled
Channel: 1
Match: 00,00
Trigger input1: X
Trigger input2: X
Trigger input3: X
Message :
Priority: L
Min. notification interval: 1 s
Re-notification interval : 0 s
- Trigger 3
Serial trigger input: disabled
Channel: 1
Match: 00,00
Trigger input1: X
Trigger input2: X
Trigger input3: X
Message :
Priority: L
Min. notification interval: 1 s
Re-notification interval : 0 s
Change Setup:
0 Server
1 Channel 1
3 E-mail
5 Expert
6 Security
7 Defaults
8 Exit without save
9 Save and exit Your choice ?
To change the IP settings of the device server, Select '0' (Server)
At the prompts, enter the desired settings.
For example, to set an IP = 10.100.103.1, netmask = 255.255.255.0, with no gateway:
IP Address : (000) 10.(000) 100.(000) 103.(000) 1
Set Gateway IP Address (N) ?
Netmask: Number of Bits for Host Part (0=default) (0) 8
Set DNS Server IP addr (N) ?
Change telnet config password (N) ?