User manual

10 GR-UT699 Development Board
User Manual
2 ELECTRICAL DESIGN
2.1 Block Diagram
The GR-UT699 board provides the electrical functions and interfaces as represented in the
block diagram, Figure 2-1.
Figure 2-1: Block Diagram of GR-UT699 board
The Main PCB is of standard Double Eurocard format (233.35 x 160mm) and, in principle,
could be used 'stand-alone' on the bench-top simply using an external +5V power supply.
The board is fitted with a Compact PCI front panel, and is compatible with mounting in a 6U
Compact PCI rack.
2.2 UT699 ASIC
The UT699RH ASCI is packaged in a 352-pin Ceramic Quad Flatpack, and is soldered in to
the PCB.
Details of the interfaces, operation and programming of the UT699 ASIC is given in the
UT699 Datasheet, RD-3.
© Aeroflex Gaisler AB March 2013, Rev. 0.6
UT699RH
ASIC
SPW
ETHER-
NET PHY
CANBUS
SERIAL
DSU
UART
RS232
MEMORY
EXPANSION
POWER
&
AUX
FLASH
EEPROM
SDRAM
SRAM
GPIO I/F
POWER
16 x GPIO
USB-
SERIAL
2 x CAN
4 x SPW
10/100 Mb
ETHERNET
1 x RS232
UART
DIP
SWITCHES
COMPACT PCI
INTERFACE