Technical data

Aeroflex Operation Manual
NAV 2000R SIGNAL GENERATOR - REV. 0 – JULY 26, 2007 - PG 1-2
Mass (Weight) 61.2 kg (135 lbs.)
Ventilation Requirements Keep the ventilation openings clear.
IEC Overvoltage Category II
Pollution Degree 1
Equipment Meets These Listed Standards EN 61010-1 (IEC 61010-1)
EN 61328
EN 61326 Class A
Cables and Wires
1. It is recommended that all cables connecting to the
AUDIO OUTPUT (A3J5), EXTERNAL MOD INPUT
(A4A2P1), 10 MHZ OUT (A5A1J7), and 10 MHZ IN
(A5A1J6) terminals (ports) use M17/84-RG223
double shielded coaxial cable, or equivalent,
properly terminated to BNC connectors.
2. It is recommended that the cable connecting to the
RF OUTPUT (A1J1) terminals (port) use M17/75-
RG214 double shielded coaxial cable, or equivalent,
properly terminated to N connectors.
Warm Up Duration 30 min minimum for specified performance.
Nonvolatile Memory Life 10 years minimum data retention in the absence of
external power.
Data Input / Output Compatible with IEEE Standard 488-1978
Electrical Specifications
Power Requirements
115/230 V
60/50 Hz
750 mA max, 70 W