Technical data

Aeroflex Operation Manual
NAV 2000R SIGNAL GENERATOR - REV. 0 – JULY 26, 2007 - PG 1-7
COMM
Modulation tones (two tones selectable)
Preset 1000 Hz and 2000 Hz
Variable 10 Hz to 18 kHz (0.1 Hz increments)
Frequency accuracy ± 0.005%
Distortion (audio, 10 Hz < 0.1% THD
to 10 kHz)
Amplitude modulation
Range total % mod not to exceed 99%
Preset @ 1000 Hz 30%
Variable 10 to 18 kHz 0 to 99% in 0.01% increments
Accuracy ± 2% of setting for 10% to 95%
External modulation
Input impedance 5 kΩ
Maximum modulation depth 99%
Modulation distortion 2% maximum
Modulation bandwidth 10 Hz to 22 kHz
Input level 1 V peak
Morse Code (ident) - Programmable in VOR, Localizer or ADF mode
Max Length 6 characters
Rate programmable
Dot/Dash/spacing times individually programmable
Audio Output Level 1.414 ± 0.025 V rms into 600 Ω. Adjustable downward
in audio modes
1.4 UNITS AND ACCESSORIES SUPPLIED
NAV 2000R VOR/ILS/COM Generator JPN 01-0520-50
NAV 2000R CD Operation Manual JPN E6-0520-5A
Detachable Power Supply Cord
1.5 UNITS AND ACCESSORIES REQUIRED
The NAV 2000R requires the following items to be interconnected to a remotely operated test equipment
environment.
ITEM DESCRIPTION TYPE
1 GPIB Cable It is recommended that a HP type 10833X
braided shield cable, or equivalent, be used.