Technical data

Aeroflex Operation Manual
NAV 2000R SIGNAL GENERATOR - REV. 0 – JULY 26, 2007 - PG A-1
APPENDIX A
GPIB COMMAND QUICK REFERENCE
GENERAL
COMMANDS
STATUS
Command: STAT?
SET MODE
Command: MODE=
Values: VOR, VORa, LOC, LOCa, G/S, MKR, COM, EMM
WHAT MODE
Command: MODE?
Values: VOR, VORa, LOC, LOCa, G/S, MKR, COM, EMM
LOCAL
Command: LOCAL
SET DEFAULTS
Command: DEFAULT
REVERSE POWER PROTECTION RESET
Command: RPP RESET
RF LEVEL
Command: RF LEVEL= dBm Values: -127 dBm to 0 dBm
uV Values: .100 uV to 890 uV (to nearest .1 dBm)
mV Values: 1.00 mV to 224 mV (to nearest .1 dBm)
Default: - 127.0 dBm
AUDIO LEVEL
Command: AUDIO LEVEL=
Values: 0 to 1.000 Vrms (0.001 Vrms steps)
Default: 0.500 Vrms
RF FREQUENCY
Command: RF FREQ=
Values: 0.150 MHz to 450.000 MHz (0.00001 MHz steps)
VOR
RF LEVEL
Command: RF LEVEL=
dBm Values: -127 dBm to 0 dBm
uV Values: .100 uV to 890 uV (to nearest .1 dBm)
mV Values: 1.00 mV to 224 mV (to nearest .1 dBm)
Default: -127.0 dBm
BEARING
Command: BEARING=
Values: 0.00 to 359.99 degrees (0.01 degree steps)
Default: 0.00 degrees