Technical data

Aeroflex Operation Manual
NAV 2000R SIGNAL GENERATOR - REV. 0 – JULY 26, 2007 - PG A-9
TONE #1 FREQUENCY
Command: COM FREQ1=
Values: 10 Hz to 18000.0 Hz (.1 Hz steps)
Default: 1000.0 Hz
TONE #2 FREQUENCY
Command: COM FREQ2=
Values: 10 Hz to 18000.0 Hz (.1 Hz steps)
Default: 2000.0 Hz
SELCAL
RF LEVEL
Command: RF LEVEL=
dBm Values: -127 dBm to 0 dBm
uV Values: .100 uV to 890 uV (to nearest .1 dBm)
mV Values: 1.00 mV to 224 mV (to nearest .1 dBm)
Default: -127.0 dBm
RF ON/OFF
Command: SCL RF KEY=
Values: ON, OFF
Default: OFF
SELECTIVE CALLING INITIATE
Command: SCL INIT=
Values: ACTIVE, INACTIVE
Default: INACTIVE
PULSE PERCENT MODULATION
Command: SCL %MOD=
Values: 0 to 99.00% (0.01% steps)
Default: 30.00%
TONE AMPLITUDE DIFFERENCE
Command: SCL DIFF=
Values: -40 to +40 dB (1 dB steps)
Default: 0 dB
PULSE #1 CODE
Command: SCL 1 CODE=
Values: AA - SS
Default: AB
PULSE #2 CODE
Command: SCL 2 CODE=
Values: AA - SS
Default: CD
PULSE #1 TONE #1 FREQUENCY
Command: SCL 1 TONE 1=
Values: 100 to 9999.9 Hz (0.1 Hz steps)