User's Manual

The AP550 has one USB port that is protected by a port cover. To access the port, remove the

screw that secures the cover in place. For extra protection, keep the cover in place when the

port is not in use.

Antennas

The AP550 has thirteen antennas:

• Eight single-band 5 GHz antennas

• Four dual-band 2.4 GHz/5 Ghz antennas

•One

BLE antenna.

Locking Slot

When mounting the AP on a ceiling track or flat surface, you can secure it to the track using a

Kensington ® lock in the lock slot or using a security bracket (shipped separately). See "Securing

the AP550".

Hardware Specifications

The following specifications describe the physical features and hardware components, PoE electrical

requirements, and the temperature and humidity ranges in which the AP550 can operate.

Device Specifications

• Chassis dimensions: 8.15" W x 2.17" H x 8.15" D (208 mm W x 55 mm H x 208 mm D)

• Weight: 2.2 lb (1 kg)

• One RJ45 (9600 bits per second, 8 data bits, no parity, 1 stop bit, no flow control)

• Eth0 Ethernet port: autosensing 10/100/1000Base-T/TX Mbps, with IEEE 802.3af- or 802.3at-

compliant PoE

• Eth1 Ethernet Port: autosensing 10/100/1000Base-T/TX Mbps

• RJ45 power input pins: Wires 4, 5, 7, 8 or 1, 2, 3, and 6

Power Specifications

• IEEE 802.3at PoE Power: Full 4x4:4 802.11ac MU-MIMO, dual 5 GHz, USB, BLE and 2 Ethernet

ports

• PoE nominal input voltages: 48 V

Environmental Specifications

• Operating temperature: 32° F to 104° F (0° C to 40° C)

• Storage temperature: -40° F to 158° (-40° C to 70° C)

• Relative Humidity: 5% to 95% noncondensing

Page 1

of 1

AP550 Hardware User Guid

USBPort