User's Manual

DFS Instructions
Need: DFS client laptop
Setup the DFS client to fixed IP address: 192.168.1.3
Set the channel and bandwidth using the radio commands shown previously
Once the client laptop associates with the AP, confirm that you can ping the laptop wired
to the AP.
On client laptop, open file explorer, then connect the laptop on the wired side to find out
the FCC video, and then double click the video file to start the VLC playing session.
To control the data rate while stream:
ssid jpn_dfs 11a-rate-set XX
ssid jpn_dfs 11n-mcs-rate-set XX
This will set the maximum data rate, system can auto negotiate at a lower rate.
EUT
Laptop
(192.168.1.2) – VLC
server
POE
ENET Switch
Serial
AC
DFS client
(192.168.1.3)
ethernet
ethernet