Troubleshooting Guide

(154,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
6. Navigation (if so equipped)
Voice command
1. Push <
> located on the steering
wheel.
2. After the tone sounds, speak a com-
mand.
Use the following voice command to set
an intersection as a destination:
“Intersection” (if so equipped)
SETTING BY PHONE NUMBER
AIVINJN1-87C28043-E7CD-4FB6-9E27-0811FF88248E
If the phone number of a facility is
registered in the map data, it is possible
to search for a facility by entering the
phone number.
INFO:
. If the area code of the specified tele-
phone number does not exist in the
map data, the system cannot search
for the location.
. Only the locations included in the
database in the map data can be
searched for by phone number. Resi-
dential phone numbers cannot be
used to search for a location.
1. Push <MAP>.
2. Touch [Destination] on the Launch
Bar.
3. Touch [Phone Number]. The telephone
number input screen is displayed.
4. Enter the telephone number including
the area code. After finishing entry,
touch [OK].
5. The entire route is displayed. Touch
[Start] to start route guidance.
INFO:
If there are more than one location
registered for the phone number, a list
screen is displayed. Touch an item on the
list to select a preferred location.
SETTING FROM SAVED ROUTES
AIVINJN1-174315DE-CFE8-4311-94E7-67FE9F3D0C92
It is possible to select a preferred route
from the saved routes.
1. Push <MAP>.
2. Touch [Destination] on the Launch
Bar.
3. Touch [Saved Routes]. A list screen is
displayed.
4. Touch the preferred route from the
list.
5GB0722X
5. The entire route is displayed. Touch
[Start] to start route guidance.
INFO:
. Touch [
] to edit the saved route.
“Editing stored route” (page 6-55)
. The saved route only includes loca-
tions (destination and waypoints) and
route calculation conditions, not the
route itself. Therefore, when the desti-
nation is set using a saved route, a
different route may be suggested if
the current vehicle location is different
from the one when the route was
saved.
. To save the current route, touch [Save
Current Route]. A route can be saved
only when it includes one or more
waypoints.
“Storing route” (page 6-50)
Condition:
6-26