Troubleshooting Guide

(179,1)
[ Edit: 2018/ 4/ 26 Model: AIVINJ-N ]
2. Touch [Save Route]. A confirmation
message is displayed. Select [Yes] to
store the current route.
Other settings
A route can also be stored using the
following procedure.
1. Touch [Settings] on the Launch Bar.
2. Touch [Navigation].
3. Touch [Address Book].
4. Touch [Saved Routes].
5. Touch [Save Current Route]. A confir-
mation message is displayed.
6. Confirm the contents of the message
and touch [Yes]. The current route is
stored.
INFO:
. At least 1 waypoint must be set for the
route to be stored.
. A stored route includes only locations
(destination and waypoints) and route
calculation conditions, not the route
itself.
. The route is stored in the first available
position number in the stored routes
list.
. When 10 routes are already stored in
the address book, a new route cannot
be stored until a route is deleted.
“Deleting stored item” (page 6-55)
STORING AVOID AREA
AIVINJN1-495A7589-BA25-41EF-82F6-33DEBDE7742E
An Avoid Area can be stored. The Avoid
Area is an area that can be excluded from
a route, such as a road that is always
congested. Once Avoid Areas are stored,
the system avoids those areas when
calculating a route. Up to 10 Avoid Areas
can be stored.
1. Touch [Settings] on the Launch Bar.
2. Touch [Navigation].
3. Touch [Address Book].
4. Touch [Avoid Area].
5GB0746X
5. Touch [Add New].
Touch an appropriate method to
search for a location.
“Setting destination” (page 6-15)
6. Touch [OK].
7. Adjust the information of the Avoid
Area as necessary.
“Editing avoid area” (page 6-55)
8. Touch [OK] to store the avoid area
information.
INFO:
A maximum of 10 Avoid Areas can be
stored. When 10 Avoid Areas are already
stored, a new Avoid Area cannot be stored
until a currently stored Avoid Area is
deleted.
“Deleting stored item” (page 6-55)
6. Navigation (if so equipped)
Condition:
6-51