Instruction manual

9
HOW TO OPERATE THE AERONEB
®
GO NEBULIZER
3 x AA LR6
1. Turn the Aeroneb
®
Go Control Module
upside down. Slide the battery cover
in the direction of the arrow to remove
the lid. Put in three (3) “AA” batteries
(not included). Replace the cover on
the Control Module and slide the cover
until it locks in place. You can expect at
least three (3) hours of operation from
a new set of disposable batteries, (up
to ve (5) hours from high performance
batteries).
2. Connect the nebulizer cable to the
Aeroneb
®
Go Control Module, indicated
by the Output symbol ( ).
3. Turn on the unit by pressing the “On/Off”
button on the Control Module. You will
see a green light on the Control Module
light up.
3 x AA LR6
4. Visually verify that aerosol is coming out
of the mouthpiece or mask to indicate
that the device is functioning properly.
NOTE: Do not cover the ventilation
holes during use.