Instruction manual

10
5. Alternatively, you can power the device
by using the AC/DC Adapter if provided
(refer page 7). Plug the AC/DC adapter
into a standard AC electrical outlet, a
green light on the adapter indicates that
the AC/DC adapter is turned on.
6. Plug the AC/DC cable into the Control
Module, indicated by the DC Voltage
Symbol ( ).
NOTE: The AC/DC adapter does not
charge batteries.
7. Press the “On/Off” button and visually
verify that aerosol is coming out of the
mouthpiece or mask to indicate that the
device is functioning properly.
8. Place the mouthpiece between your
teeth, with your lips rmly sealed
around the mouthpiece. If you use an
aerosol mask, place the mask over your
mouth and nose. Breathe in and out
slowly through your mouth until aerosol
formation stops.
NOTE: Aerosol mask is not provided.
Do not cover ventilation holes.
9. To turn off nebulizer, press the “On/Off”
button on the Control Module.
PAGE 10